Kabin Pak Series

The Warmflow Standard Efficiency Kabin Pak Series has been specifically designed to be compact and discreet. With models starting at only 900mm high and 413mm wide, the Standard Efficiency Kabin Pak Series is available in Standard, Pumped, System and Combi variants.

• Available in outputs from 15 to 33kW
• Stylish, IP45 rated, green weatherproof casing
• Front servicing
• Multi-optional low-level conventional flue and terminal guard supplied as standard
• Riello RDB2.2 burner fitted as standard
• Optional frost protection thermostat kit available

The Kabin Pak Standard Boilers (K) are supplied with a pre-wired factory-fitted burner and thermostat. Only one IE320 mains socket (supplied) needs to be wired on site. The multi-optional low-level flue can be positioned to exhaust from the back, left or right hand side of the casing.

The Kabin Pak Pumped Boilers (KP) are supplied with a pre-wired factory-fitted burner, thermostat and circulating pump. Only one IE320 mains socket (supplied) needs to be wired on site. They are also factory-fitted with a 3-Bar pressure relief valve and auto air vent as standard. The multi-optional low-level flue can be positioned to exhaust from the back, left or right hand side of the casing. The Kabin Pak Pumped Boilers allow for hassle free, quick and cost-effective installations.

The Kabin Pak System Boilers (KSHE) are supplied as a kit, consisting of a Kabin Pak Pumped Boiler (KPHE) (see above) and a System Kit.

As described above, the Kabin Pak Pumped Boiler (KP) is supplied with a pre-wired factory-fitted burner, thermostat and circulating pump. Only one IE320 mains socket (supplied) needs to be wired on site. The multi-optional low-level flue can be positioned to exhaust from the back, left or right hand side of the casing.

The System Kit consists of a pre-assembled expansion vessel, pressure gauge and filling loop. A pressure hose for connection to the system is also supplied. The System Kit can be connected in only a few minutes creating a sealed heating system.

All models listed below are supplied with System Kit SK1 having a capacity of 12 litres suitable for a maximum total system volume of 145 litres. Refer to BS7074 and the Boiler Manual for further guidance on expansion vessel sizing.

The Kabin Pak Combi Boilers (KC) are compact and discreet, yet extremely powerful. Only 600mm wide they capable of producing over 18 litres of hot water per minute. By utilising the latest twin pump technology and an integral thermal heat store within the boiler casing, the boilers are able to provide plenty of hot water when you need it, as well as helping to keep your heating costs to a minimum.

• Available in outputs from 15 to 26kW
• Stylish, IP45 rated, green weatherproof casing
• Front servicing
• Complete with circulating pump, filling loop, pressure gauge and 12 litre expansion vessel
• Integral thermostatic mixing valve
• Multi-optional low-level conventional flue and terminal guard supplied as standard
• Riello RDB2.2 burner fitted as standard
• Frost protection thermostat fitted as standard

The Kabin Pak Combi Boilers (KC) are supplied fully pre-wired with a factory-fitted burner and control panel. The multi-optional low-level flue can be positioned to exhaust from the back, left or right hand side of the casing.

1. Pressure Relief Discharge (15mm)
2. Heating Flow (22mm)
3. Domestic Hot Water (22mm)
4. Cold Water Mains (15mm)
5. Heating Return (1" BSP)

Completing the series are 2 high output models for installations with increased heating demand.

Key Features

• Available in outputs from 33 to 58kW
• Galvanised, IP45 rated weatherproof casing
• Top servicing
• Omni-directional low-level flue and terminal guard fitted as standard
• Riello RDB burner fitted as standard

The boilers are supplied with a burner and thermostat that can be easily wired on site.